Vinyl Gates in Orange County
We love our fence and gates. The quality is really great.
Pleased with our new gates and the installation crew was on time, quiet, cleaned up everything. In short very professional.
Judy & Gene Campbell
Laguna Hills, CA
I was very satisfied with the installation and happy with my gate.
A & M Caid
Garden Grove, CA
We had to go out for the evening and thought our installation date had been postponed. We were pleasantly surprised to find our gate was installed while we were out. Good job!!
Fountain Valley, CA
All of our vinyl products are custom fabricated in Huntington Beach, CA.
We sell and install locally and ship to all 50 States in the U.S.A.
GATE QUESTIONS YOU SHOULD BE ASKING YOURSELF
HOW THICK ARE YOUR GATES
Most vinyl gates are 1.5" to 2" thick, and they are basically a panel of fence hung on hinges. The problem is a panel of fence by itself is not strong enough to be a gate. They are too floppy and will eventually drag on the ground and not close properly. Our "Sta True" gates are over 3.5" thick and have the strength and rigidity to handle the harsh weathering conditions.
HOW ARE THE GATES FASTENED TOGETHER?
Many vinyl gates have corners that are held together with pop rivets, they have no cross brace for support, and they are hung with wood gate hardware that are opened with a string or close with ugly springs. Finyl Vinyl gates have a cross brace built into them, and are held together with solid vinyl corners, and two trunnion bolts that penetrate the entire gate so there is a metal to metal connection and you are not relying upon a small pop rivet attached to the wall of the vinyl.
WHAT HARDWARE ARE MY GATES MADE WITH?
A lot of vinyl gates are installed with a wood gate hardware called a gravity latch. You cannot open the gate from both sides with this type of hardware unless you use a string. Also, a lot of the hinges are not self-closing which is always required with pools in the backyard, and Finyl Vinyl installs self closing hinges on all our gates. All Finyl Vinyl hardware is Stainless steel and powder coated so that it won’t rust like other hardware does.
WHAT STYLES CAN GATES BE MADE INTO?
Gates can be made in all the fence styles. They can be customized widths and heights.
WHAT KIND OF HARDWARE OPTIONS ARE THERE FOR GATES?
The standard latch is stainless steel black powder coated. It can be locked with a padlock on whichever side the gate swings. Self-closing hinges are also standard. You can also order a double-sided key lock that can be rekeyed to match another key that you use for your house.
Call for a Free Design Consultation - 714.893.9921 or 877.933.6846
or Contact Us with any questions you may have.